[tab name='Product Description']

Thank you, Carmen, for suggesting this electrode design to me. It is sort of a blend of two of my design ideas. The first is the double loop designed to insulate the base electrode going around your cock and balls.

It also draws inspiration from my holy plate electrode design that was created to act as a sort of splint to help growers and shrinkers to not have to worry about their shaft electrodes coming into contact with each other.

So here is Stairway To Heaven (I do love that name), and it allows you to place the three front loops in any of the holes in the ABS body of this electrode holder. More to the point, this is the XL version for those blessed with some extra length.

My suggestion would be to use the two outer loops on one channel to stim the Dorsal and Perineal nerve groups.

For more information about stimming these nerves, check out my Electrosex Penis Play Guide For Hands-Free Orgasms.

I recommend using the middle loop in conjunction with the tip of an anal electrode. Something like the Moaner or Large Flo would be perfect, but even a monopole pad electrode placed behind your anus would work well too.

This electrode holder is made from ABS (think Lego plastic); it's hard-wearing, non-porous and doesn't need painting or any other finish. To produce these electrodes, I have had to invest in new equipment. The post-print processing time to get the smooth, non-porous finish takes me a long time, and this is reflected in the price. If you prefer the best, then this is the version for you. They will be available in very limited quantities, so grab one while you can.

This cock loop holder is printed in ABS. This holder comes with four generous lengths of 6mm conductive rubber tubing that can be trimmed down to suit your anatomy. The high-quality British CR takes a 2mm plug.

It is also available as just the printed and smoother part for anyone with the shorter version who wants to upgrade.

It will be dispatched with the three 6mm conductive rubber tubing loops already fitted.

• 1 x 33cm/13" Base Loop.
• 3 x 25cm/10" Shaft Loops.

Just slip it over your cock and tighten it before plugging your 2mm plug into the CR.

Note: This product is supplied as is, and I am not liable for any problems that arise from its use. It is sold as a novelty item and carries no warranty. Your statutory rights remain. The images shown are renderings.

[tab name='Product Safety & Care']

Material

This product is 3D printed in ABS, a very strong plastic with excellent mechanical properties. Once printed I post-process the components using a procedure called vapour smoothing. This uses Acetone vapour to melt and smooth the surface of the prints turning them from rough prints into smooth, shiny prints that are non-porous.

Porosity is one drawback of the 3D printing process as it leaves microscopic holes in the surface of prints that are perfect for bacteria to grow in and hard to clean. Vapour smoothing prints seals these tiny holes and imperfections, leaving the products smooth and sealed.

This is important as it makes cleaning post-play so much easier.

Sharing

However, I do not recommend sharing these products between partners unless you are fluid bonded for obvious reasons.

Product Care

After play, simply wash in warm soapy water. Anti-bacterial soap is best. Once body fluids have been washed off, allow the electrode to dry thoroughly before you store it away for later use.

A deep clean can be carried out using Isopropyl Alcohol, and this will kill bacteria and remove body oils.

Never use silicone-based lubes with conductive rubber-based electrodes as the silicone will bond to the conductive rubber, effectively destroying it and insulating it.

[tab name='Shipping']

Global Shipping (pretty much)

I ship my products pretty much anywhere around the globe. I also charge shipping at cost plus a little extra for the packaging materials I use. I keep my postal rates as competitive as I can and even offer FREE SHIPPING on orders that meet the minimum requirement for that to kick in.

Here are some starter prices as an indicator (accurate rates will be displayed in the shopping cart):

UK - Prices start from just £3.50 (non-tracked service).

Europe - Prices start from just £5.15 (non-tracked service).

US & Canada - Prices start from just £5.95 (non-tracked service).

Rest of the world - Prices start from just £8.55 (non-tracked service).

Tracked services are available, but they cost more.

Discreet Packaging

I ship all orders out discreetly in plain packaging and use a franking machine for postage. Where I have to fill in a customs declaration label, I do this discreetly, so there is no mention of "Anal Gaping Plugs" or anything like that. Discretion is key to my service. Descriptions such as "Tubing", "Plastic Guides", and "Sculptures" are often used on forms.

Customs Fees, Duty or Import Taxes

UK orders do not incur any of the above, but your order "may" be subject to importation duties or fees if you are an international customer. The threshold for this varies from country to country, and you should look into the situation where you are. I do not collect VAT for EU orders. You may be charged taxes or duties when your package is delivered. Please check your country's customs policies before you order.

[tab name='Feedback']

Feedback from "C"

I'm not necessarily a religious person but holy mother of god!!!! Absolute perfection.

One of the things I love about E-Stim (besides the pleasurable aspects) is that everyone can find their own "Sweat Spot". STH IS my sweat spot. Today's session was incredible - primarily because I no longer had to fidget around with either Tens Pads (a real PITA) or a combination of other electrodes. STH held everything snuggly in place throughout the entire session without me needing to do anything! Not only that, but it was unphased by any session liquids and allowed me an edging session that lasted well over an hour in a state of bliss . . . .

Phew, my goodness . . .

So I guess this is a long message and a lot of prose to say "THANK YOU, Thank You, thank you!!"

[endtab]