Inspired by problems getting monopole sticky pad electrodes to securely fit to the shaft of the penis.

This ingenious monopole electrode is 3D printed in 316L Stainless Steel giving it exceptional conductivity coupled with a wide range of connection options.

This monopole electrode has four attachment options, taking 2mm pins, 4mm banana pugs, 3.5mm snap connectors or alligator clips. This provides ten connection placement options. It comes with one of our anti-slip elasticated Velcro straps to keep it snugly in place while in use.

While self-adhesive monopole electrodes are functional they wear out and need to be replaced. The Saddle doesn't wear out, it's a stainless steel metal electrode that offers great sensations and it's really easy to use.

The plug sockets feature the novel use of small sections of conductive rubber that securely hold your plugs in place and connects them to the stainless steel body. The two tubular section on each outside edge feature two sockets. One side accepts 4mm banana plugs and the other accepts 2mm TENS style pin plugs.

The multiple connection options make this an easy electrode to hook up as the common electrode in a tri-phase system.

Just make sure that you don't connect both plugs from a channel into the same electrode as that would cause a short circuit.

Electrode Instructions

Just connect your cable from your control box (this is a monopole electrode so you will need to use it in conjunction with another electrode). Lube up its contact surface and place where you want it on the shaft of the penis.

Then use the included Velcro retaining strap, wrapping it around the penis and placing the strap between the alligator attachment rings, these rings keep the strap in place across the electrode.

Simple, effective and re-usable, which is exactly how a good e-stim electrode should be.