I charge a nominal fee for the STL files and instructions for my more complicated designs. This is one of those designs.

I print mine in ABS, but you can use PLA or PETG instead.

NOTE: You are purchasing a zip file containing one STL file and a pdf containing the instructions and suggested print settings for creating this electrode. You will need three loops of 6mm conductive rubber, one loop of 13"/33cm and two loops of 10"/25cm conductive rubber for the electrode surfaces. You will also need three cord locks sized to fit 6mm CR.

STL Files:

Stairway-To-Heaven.stl – The main part of this electrode.

I am not releasing copyright to this design or the files purchased; you may not distribute them and you can only make PERSONAL prints.

If you want one of them printed in ABS, you can get them here - Stairway To Heaven.