Bringing you the very best of kinky e-stim related products to you from our "kink cave" in deepest, darkest Derbyshire in the UK.
Orders Shipped
Monday - Friday
I charge a nominal fee for the STL files and instructions for my more complicated designs. This is one of those designs.
I print mine in ABS, but you can use PLA/PETG instead.
NOTE: You are purchasing a zip file containing three STL files and a pdf containing the instructions and suggested print settings for creating this electrode. You will need 25cm of 6mm conductive rubber and around 12cm of 4mm conductive rubber for the electrode surfaces. You will also need some acetone to glue the shield and collet together if you print it in ABS or some superglue if using another filament.
Shield.stl – The main part of this electrode.
Collet.stl – The small collet used to secure one end of the 6mm conductive rubber.
Pins.stl – The pins used to secure the free ends of the conductive rubber. You will need to print two of these.
I am not releasing copyright to this design or the files purchased; you may not distribute them and you can only make PERSONAL prints.
If you want one of them printed in ABS, you can get them here - Vaginal And Clitoral Bipolar Shield Electrode.
I will be sure to Cum back again to purchase any other products that I need.
Thanks again for your help and I will recommend your site to others.
Great service, fast shipping, and very reasonable prices for products of such quality! I love your designs.
Bringing you the very best of kinky e-stim related products to you from our "kink cave" in deepest, darkest Derbyshire in the UK.
Orders Shipped
Monday - Friday