I charge a nominal fee for the STL files and instructions for my more complicated designs. This is one of those designs.

I print mine in ABS, but you can use PLA instead.

Length of clamping faces 44mm/1.7".

NOTE: You are purchasing a zip file containing three STL files and a pdf containing the instructions and suggested print settings for creating these clamps. You will need two 6mm bolts and two 6mm nuts per clamp to connect the printed parts together.

STL Files:

ClampUpper.stl – The clamping face with the eyes.

ClampLower.stl – The other clamping face.

KnurledNut.stl – This is the knurled knobs that the 6mm nuts are inserted into. You will need to print two of these per clamp.

I am not releasing copyright to this design or the files purchased; you may not distribute them and you can only make PERSONAL prints.

If you want a pair of them printed in ABS, you can get them here - Large Nipple Clamps.