Bringing you the very best of kinky e-stim related products to you from our "kink cave" in deepest, darkest Derbyshire in the UK.
Orders Shipped
Monday - Friday
I charge a nominal fee for the STL files and instructions for my more complicated designs. This is one of those designs.
I print mine in ABS, but you could use PLA or PETG instead.
NOTE: You are purchasing a zip file containing four STL files and a pdf containing the instructions and suggested print settings for creating this electrode. You will need two 10cm lengths of 6mm Conductive Rubber for the electrode surfaces. You will also need some superglue to affix the M6 nuts in place.
Center.stl – The centre part of this electrode.
Left_Arm.stl – The left clamping arm that accepts the 6mm conductive rubber.
Right_Arm.stl – The right clamping arm that accepts the 6mm conductive rubber.
Knurled_Nut.stl - The holders for the M6 nuts. You will need to print four of these.
2 x 6mm Conductive Rubber, approximately 10cm/4" long.
6 x M6 nuts, I used nylon nuts but steel ones will be fine.
2 x 10cm/4" lengths of M6 threaded bar. I opted for a nylon threaded bar to give some flexibility but a steel threaded bar will work too.
Superglue - Used to secure the nuts in place in the knurled holders and also the centre section where the threaded bar goes through the main body.
4 x Rubber thread guards (optional), these push onto the end of the exposed threads to tidy them up.
I am not releasing copyright to this design or the files purchased; you may not distribute them and you can only make PERSONAL prints.
If you want one of them printed in ABS, you can get them here - Bipolar Pussy Spreader Electrode.
I will be sure to Cum back again to purchase any other products that I need.
Thanks again for your help and I will recommend your site to others.
Great service, fast shipping, and very reasonable prices for products of such quality! I love your designs.
Bringing you the very best of kinky e-stim related products to you from our "kink cave" in deepest, darkest Derbyshire in the UK.
Orders Shipped
Monday - Friday